datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) applications catv supertrunking high power distri bution networks redundant ring architectures fttx networks features high saturation output power up to 43 dbm (pre-splitter) dual power supplies, redundant & hot swappable ? ac or dc front panel optical input & output monitor ports snmpv2 control interface web server 10/100bt low noise figure for catv wide input dynamic range very stable output power over a wide operating temperature range redundant power supplies redundant fans the medallion 7200 series product line is a family of state-of-the-art high performance catv erbium/ytterbium doped fiber amplifiers (eydfa). packaged in a convenient 2 ru housing, this line of fiber amplifiers has been optimized for superior output power stability and the ex ceptionally low noise figures demanded by catv applications. the medallion 7200 provides very stable optical outputs over a wide operating temperature range. internally it is s upported with input and output isolators for enhanced system stability and performanc e. optical power is continuously monitored at the input and output for aut omatic power control during operation over a wide operating temperature range. the medallion 7200 offers a full range of flexible configurations and a rich set of features. these include remote management capability through snmpv2, telnet and a resident web server. the medallion 7200 also supports mibs specified by scte (society of cable television engineer s) for this product class. for local management, an rs-232 port is standard, along with a convenient front panel control menu provided on a vacuum fluorescent display (vfd). high level features automatic power control and/or automatic gain control modes port count, optical power, and connector style options integrated per channel wdm for fttx pon applications monitors & alarms loss of input power loss of output power pump laser diodes bias current pump laser diodes temperature case temperature
datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) general and electrical characteristics property requirements symbol min typ max unit ac power supply voltage v ac 85 265 v ac dc power supply voltage v dc -36 -48 -72 v dc power consumption note 1 p tot 80 w agency listing, emi en 50083-2-2006 en 55013 en 61000-3-2 en 61000-4-6 en 61000-4-3 en 61000-4-2 en 61000-4-4 en 61000-3-3 fcc part 15 (subpart b, class a), 107(b), 109(b) agency listing, safety iec 60950-1/a1:2009 iec 60825-1:2007 transportation vibration gr-63-core transportation shock gr-63-core note 1: 80 w valid at 0 dbm input power and 43 dbm total out put power within specified operating temperature range.
datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) optical characteristics property symbol min typ max unit wavelength range op 1545 1550 1562 nm input power p in -10 0 12 dbm total output power options note 1 p out 30 43 dbm output power delta to nominal note 2 p out -0.5 0.5 db output port count options (sc) notes 1,3 - 1 64 noise figure note 4 nf 6.0 db optical isolation iso 30 db input power alarm los -12 -11 -10 dbm input monitor loss lmon_in 22.5 23.5 24.5 db output monitor loss lmon_out 22.5 23.5 24.5 db note 1: pre-splitter total output power. number of ports vary by model type. note 2: valid for 1-16 ports. models with greater than 16 output ports 1.2 db deltas. note 3: model types are specified by output power pe r port. output power per port is limited to 21 dbm. note 4: test condition with input power = 0 dbm (@ 1550 nm). note 5: specifications valid within operating temperature range. absolute maximum ratings property symbol min typ max unit operating temperature range to 0 50 o c storage temperature range ts -40 85 o c relative humidity (non condensing) h 0 95 %
datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) outline drawing
datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) european union ?rohs directive? compliance except for the exemption claimed herein for lead used in solder for network infrastructure equipment, all homogenous materials contained in the product contain less than the ma ximum concentration levels for lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybro minated biphenyl ethers permitted under the european union directive 2011/65/eu (t he "rohs directive"). model number information 7200 - - - logo & customer specific integrated wdm output power per port number of ports optics optical input optical output optical monitor powe r supply 0 = emcore logo 0 = integrated wdm xx = xx dbm/port (maximum: xx=21 dbm) 01 = 1 port 02 = 2 ports 04 = 4 ports 08 = 8 ports 16 = 16 ports 20 = 20 ports 32 = 32 ports 64 = 64 ports 1 = sc/apc 1 = front 1 = front 1 = front 1 = ac primary, no secondary 1 =no logo 1 = no integrated wdm 2 = fc/apc 2 = rear 2 = rear 2 = rear 2 =dc primary, no secondary 3 = e2000 3 = none 3 =ac primary, ac secondary 4 = sc/apc angled 4 =ac primary, dc secondary 5 = fc/apc angled 5 =dc primary, dc secondary 6 = e2000 angled note 1: not all configurations are available; please contact your emcore sales representative. e.g. 7200-00-1632-11135 (eydfa, emcore logo, with in tegrated wdm, 32 ports, 16 dbm/port, sc/apc, front input/output, no optical monitors, dual dc) e.g. 7200-11-1764-11133 (eydfa, no emco re logo, 64 ports, 17 dbm/port, sc /apc, front input/output, no optical monitors, dual ac)
datasheet | april 2016 fiber optics information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. | rev 2016.04 medallion 7200 series catv fiber amplifier erbium/ytterbium doped fiber amplifier (eydfa) laser safety information class 1m laser products iec 60825-1:2007 en 60825-1:2007 complies with 21 crf 1040.10 and 1040.11 except for deviati ons pursuant to laser notice no. 50 dated june 24, 2007 caution: use of controls, adjustment and procedures other than those specified herein may result in hazardous laser radiation exposure.
|
